If
you want to keep your car safe, make sure the windshield of your vehicle
is strong enough. The windshield helps ensure the integrity of your car.
However, with the passage of time, the windshield fights with harsh weather and
other elements. At times, windshields break. If this is the case with you, we
suggest that you get it replaced or repaired.
Types
of Car Windshield Cracks
These
cracks are of many types. Based on the objects that hit the car, given below
are the most common types.
Chip:
When your windshield comes into
contact with a small object or crack, the glass may lose a tiny chip or piece.
With time, these chips tend to spread and evolve into a bigger area.
Edge
crack: these cracks occur along the edge of
the windshield. Often, when this area gets hit by something hard, meandering
cracks occur. As a result, you need to replace the entire thing.
Stress
crack: As the name suggests, this type of
crack occurs when the glass experiences a lot of stress due to heat.
Should
You hire a Professional or do it yourself?
Let's
answer this important question first. Usually, if the size of your windshield
chip, break or crack is less than 6 inches, you can repair it. But if the crack
is bigger than that, you may need to replace the whole windshield.
Ideally,
you may want to fix the chip as soon as you can. If there is an underdeveloped
chip, you can use an adhesive kit to fill in the chip. The idea is to remove
the air from the inner layer and then seal the impact point.
Here
is how a Professional Performs the Windshield Replacements
You
need to go through multiple steps in order to remove and replace the car
windshield. Therefore, it may not be a good idea to do the repair yourself.
Given below is how a professional does the job.
Step
#1: First off, you need to cover the
interior and exterior to ensure it is protected from the tiny pieces of glass
that may drop from the broken windshield.
Step
#2: Now, you may want to remove the
molding from the windshield perimeter.
Step
#3: Grab the right tool to disconnect
the windshield from the area where it's welded to the car. All you need to do
is use the tool to cut and separate it.
Step
#4: At this step, you need to remove
the glass by lifting it up and pushing out from the inside. You can get a
helping hand to do so.
Step
#5: Follow a couple of priming steps in
order to ensure the frame sticks to the new windshield.
Step
#6: Once installed, you can leave the
windshield to set based on the manufacturer's guidelines.
Conclusion:
So,
if your windshield is broken, make sure you get it fixed as soon as possible.
However, if the problem is too serious, you may want to contact a technician to
do the job for you.
Article Source: http://EzineArticles.com/10146135
